•You should use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.
•Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Warning
•• Never remove the casing of this unit.
•• Never lubricate any part of this unit.
•• Place this unit on a flat, hard and stable surface.
•• Never place this unit on other electrical equipment.
•• Only use this unit indoors. Keep this unit away from water, moisture and
•• Keep this unit away from direct sunlight, naked flames or heat.
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:
1Remove fuse cover and fuse.
2Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
3Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
