Device Repair
Your device is controlled by an internal program called firmware. In case your device has a problem, or you wish to format the device, you may need to repair it.
✔TIPPlease charge your device fully before device repair. This will ensure steady power supply for completing the whole process.
1 Connect your device to your computer (powered by the supplied AC/DC adapter if applicable).
2Launch Device Manager User Interface by 
icon in the taskbar and selecting "Launch Device Manager" or by going to
Start ➔ Programs ➔ Philips Device Manager
3In the main window, go to the repair tab and click Repair.
4You will be prompted before repair begins.
ATTENTION!
All media contents will be erased!
5Click OK to continue. Click Cancel to stop.
6The Device Manager will repair your device. Once the repair is complete, the device can be used again.
Your device will be automatically disconnected as soon as Device Manager finishes interacting with your device and will get connected back to the PC after the repair is complete.
32
