22 EN
4 Update software
Before you update the software of this player, check the current software version:
• Press
, and then selec t [Setup] > [Advanced] > [Version Info.], and press OK.
Update software via the Internet
1 Connect the playe r to the Internet (see “Set u p a network”).
2 Press , and select [Setup].
3 Select [Advance d] > [Software Update]> [Network].
»If an upgrade media is detected, you are prompted to start the update.
4 Follow the instr uctions on the TV scr een to update the soft ware.
»When the update is complete, this player automatically turns off and on again.
Update software via USB
1 Check the latest software version on www.philips.com/support.
• Search for your mode l and click on “Softwa re and drivers”.
2 Download the sof tware into a USB stor age device.
a Unzip the download , and make sure that the unz ipped folder is named “UP G_ALL”.
b Put the “UPG _ALL” folder in the root dir ectory.
3 Connect the US B storage device to the (USB) connector on this p layer.
4 Press , and select [Setup].
5 Select [Advance d] > [Software Update]> [USB].
»If an upgrade media is detected, you are prompted to start the update.
6 Follow the instr uctions on the TV scr een to update the soft ware.
»When the update is complete, this player automatically turns off and on again.
Caution
• Do not turn off th e power or remove the USB s torage device whe n the software u pdate is in progress
because you might d amage this player.