Basic Operations
Powering On/Off
Using Front Panel or Remote Control
Make sure the monitor is plugged into the wall outlet and the main AC switch located on the rear of the monitor is switched to ON position. If the power is plugged in and the AC switch is on, the STATUS LED will illuminate in orange color.
Press the | key on the panel or the remote | POWER (Toggle) |
control. |
|
|
The monitor will now turn on after a brief pause. The STATUS LED will now turn green to indicate power on status.
To turn power off, simply press the 
key on the panel or the remote control once again.
Changing Inputs
Using Front Panel or Remote Control
Press the INPUT key on the panel or the 
key on the remote control.
Pressing the INPUT key will cycle the monitor through all available input signal sources in the following order:
Input Select
(Toggle)
22
