Pptp Point-to-Point Tunneling Protocol | Philips CPWBS054CPWBS054

ENGLISH 19

PPTP (Point-to-Point Tunneling Protocol)

Point-to-Point Tunneling Protocol is a common connection method used for xDSL connections in Europe. It can be used to join different physical networks using the Internet as an intermediary.

If you have been provided with the information as shown on the screen, enter the assigned IP address, subnet mask, default gateway IP address, user ID and password, and PPTP Gateway.

The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1460) unless you have a particular reason to change it.

Enter a Maximum Idle Time (in minutes) to define a maximum period of time for which the Internet connection is maintained during inactivity.

If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 0)

Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again.

Click FINISH to complete the setup.

Image 19

Philips CPWBS054CPWBS054 manual Pptp Point-to-Point Tunneling Protocol, Click Finish to complete the setup

Contents

Wireless Base Station 11g Page Finnish English Helpline Table of Contents Packaging contents Wireless Base Station 11g Indicator LEDs Your Wireless Base Station 11gReset button Power Disclaimer Safety PrecautionsImportant information Environmental information Installing the Wireless Base Station How to use the Setup program How to create a wireless network How to create a wired network using Ethernet cables Station 11g Windows 98SE/Me/2000 and XP Instaling and Configuring TCP/IPInstalling TCP/IP Configuring a Macintosh Computer Running the latest firmware version Configuring the Wireless Base Station 11gDisable Proxy Connection View statistics to monitor network activity Accessing the Wireless Base Station setting menus DSL modem Setup, virtual DMZ hosts, and other advanced functionsMaking Configuration Changes Navigating the Web Browser Interface Cable Modem Setup WizardTime Zone Broadband Type PPPoE xDSL Fixed-IP xDSL Pptp Point-to-Point Tunneling Protocol Click Finish to complete the setup Menu Description Advanced Setup System Password Settings Parameters for the selected connection type Internet SettingsRemote Management Base Station 11g Point-to-Point Tunneling Protocol Pptp Point-to-Point Over Ethernet PPPoE Static IP Local netwerk LAN Channel and Ssid Wireless Encryption Address Mapping Network Address Translation NATVirtual Server Special Applications As shown in the following screen Access ControlFirewall Address for the client PCs Parental Control MAC Filtering Table Schedule Rule Enables Schedule-based Internet access control Intrusion Detection Use this section to create your network schedule rules DMZ Demilitarized Zone Ddns Dynamic DNS Settings Tools Firmware Upgrade Tools Configuration ToolsTools Complete when the power LED stops blinking Tools Reboot Following items are included on this screen StatusSection Description Wireless Base Station’s configuration menu How to secure the Wireless Base Station 11g? Click ‘System’ Click ’Password Settings’ English Setting an encryption for your wireless network English Your wireless network adapter Take note of your passphrase and encryption settingsClick ‘Apply’ to start using the encryption Wireless Base Station 11g You will need to run the Setup program on the CD again For Windows XP and Windows How to set-up a computer network? English Wizard Network Settings Wizard Network Setup appears. Click ‘Next’ to continue English English English For Windows 98SE and Windows Me English English English Verify your connection to the Wireless Base Station 11g TroubleshootingAm getting an IP Address that starts with Have another IP Address displayed Browser Configuration10/100 LED does not light after a connection is made Specifications Sensitivity Channel RF Output PowerRF Power Operating 0682