22ENGLISH
Remote Management
| Remote Management allows a remote PC to configure, manage, and |
| monitor the Wireless Base Station 11g using a standard web browser. |
| Check Enable and enter the IP address of the remote host. Click APPLY. |
Note: | If you specify 0.0.0.0 as this IP address, any host can manage the Wireless |
| Base Station 11g. |
| Internet Settings |
| Specify the Internet connection type provided by your Internet Service |
| Provider, then click More Configuration to enter detailed configuration |
| parameters for the selected connection type. |
| Dynamic IP |
The Host Name is optional, but may be required by some ISPs.The default MAC address is set to the Internet’s physical interface on the Wireless Base Station 11g. Use this address when registering for Internet service, and do not change it unless required by your ISP. If your ISP used the MAC address of an Ethernet card as an identifier when first setting up your broadband account, only connect the PC with the registered MAC address to the Wireless Base Station 11g and click the Clone MAC Address button.
This will replace the current Wireless Base Station MAC address with the already registered Ethernet card MAC address. If you are unsure of which PC was originally set up by the broadband technician, call your ISP and request that they register a new MAC address for your account.
Register the default MAC address of the Wireless Base Station 11g.
