26ENGLISH
Wireless
To configure the Wireless Base Station 11g as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Network Name (or Service Set identifier/SSID) (Default: philips), and encryption options.
Channel and SSID
| You must specify a common radio channel and Network Name (SSID) to |
| be used by the Wireless Base Station 11g and all of your wireless clients. |
| Be sure you configure all of your clients to the same values. Network name |
| (SSID).This should be set to the same value as other wireless devices in |
| your network. (Default: philips.) |
Note: | The Network Name (SSID) is case sensitive and can consist of up to |
| 32 alphanumeric characters. |
| Transmission Rate: Set the data rate transmitted from the Wireless Base |
| Station 11g.The lower the data rate, the longer the transmission distance. |
| (Default: Fully Automatic.) |
| Basic Rate: The highest rate specified is the rate the Wireless Base |
| Station 11g will use when transmitting broadcast/multicast and management |
| frames. (Default: All.) |
| Channel: The radio channel through which the Wireless Base Station 11g |
| communicates with PCs in its service range. (Default: Auto). |
Note: | The available channel settings are limited by local regulations. |
| Broadcast Network Name: Broadcasting the SSID on the wireless network |
| for easy connection with client PCs. |
| (Default: Enable) |
