7
CQ-DFX972N
4
E
N
G
L
I
S
H
Volume
[VOLUME] (Clockwise) / [VOL}] : Up
[VOLUME] (Counterclockwise)/ [VOL{] : Down
Mute / Attenuation
(Only for remote control)
ON: Press [MUTE].
OFF: Press again.
Decreasing volume range depends on setting.
(Mute / Attenuation setting aPage 28)
Note:The sound level for each source is stored in
memory. (For radio, one volume setting for AM, one
volume setting for all FMs)
Setting Range : 0 to 40
: No sound
: Decrease the volume to
1/10 of previous level.
When Power is ON...
Press [DISP].
Display Change
Mode Display *1 Mode & Spectrum
Analyzer Display
When Power is OFF... ( )
Press [DISP].
Clock Display
(Back light is on) (Back light is off)
Display OFF
Spectrum Analyzer Display *2
Display OFF *3 Mode & Clock Display
AUDIO Indicator
*1 The title information can be
displayed in the CD/MP3/CD
changer mode. (aPage 17,
19 and 23)
*2 If you press a button, the
Mode & Spectrum Analyzer
Display appears for 5
seconds.
*3 If you press a button, the
light is turned on, the Mode
Display appears, and
the light is turned off
approximately 5 seconds
later.
Notes:
¡If title or name display is set to ON in any mode, mode display is automatically
selected. (aPage 17, 19 and 23 )
¡Set the Spectrum Analyzer pattern in a separate procedure. (aPage 26)
¡When RDS’s Clock Time (CT) service is not received, “NO CT”is displayed.
Adjust the clock. (aPage 26)
¡Do not watch moving images or title/name scroll on the LCD while driving.
Press and hold [DISP]for more than 2 seconds.
Indicators which are not displayed on Mode Display are displayed.
(Audio setting and MP3 data information, etc.)
Press [DISP]again to cancel.
Note: When RDS’s Clock Time (CT) service is not received, “NO CT”is displayed. Adjust the clock. (aPage 26)
ACC ON