Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
| Select a band and frequency (step w and e on the previous page) |
| q Press and hold [}] or [{] for more than 2 seconds until the preset |
| number blinks. |
| w Press [}] or [{] to select a preset number. |
Manual Preset | e Press and hold [}] or [{] for more than 2 seconds to memorize. |
The display blinks once, and a receiving | |
Memory | station is saved in the memory. |
Manually save a station in | Notes: |
the preset memory. | ¡Frequency setting can be performed even after selecting a preset number. |
| ¡To suspend preset write, press [DISP]. |
|
|
| Entering numbers directly from the remote control |
| Select a band and frequency (step w and e on the previous page) |
| Press and hold one of the preset button from [1] to [6] on the remote control |
| for more than 2 seconds. |
E N G L I S H
6
Select a band (step w on the previous page)
Searching
Auto Preset Memory
Automatically save stations with good reception in the preset memory.
Press and hold [BAND] for more than | Scanning | |
2 seconds. | ||
|
¡The 6 stations with good reception will be automatically saved in the memory under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5 seconds each. ¡To stop the scanning, press [}] or [{].
(Pressing one of the preset button from [1] to [6] on the remote control also can stop the scanning.)
Note: Only RDS stations will be saved at default setting (AF ON). To select non RDS stations too, set AF OFF. (a Page 11)
Note: New stations are overwritten on existing saved stations after following this procedure.
| Select a band (step w on the previous page) | |
Preset Station | Press [}] or [{] to select the preset number for tuning in the preset station. | |
|
| |
Calling |
|
|
Entering numbers directly from the remote control | ||
| Press one of the preset button from [1] to [6] on the remote control. | |
