14
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
The TV supports progressive scan signals.•
You have connected this unit with t he TV • through component video.
1 Turn on the TV.
2 Ensure that the TV progress ive scan
mode is deactivated (see the T V user
manual).
3 Switch the TV to the correct v iewing
channel for this unit.
4 Press DISC.
5 Press SYSTEM MENU.
6 Press / to select [Video Setup] in the
menu, then press .
7 Select [Component Video], then press
.
8 Select [P-Scan], then press OK.
The progressive setup is complete. »
Go to the lowest channel on your • TV, then p ress the Channel Down
button until you see the bl ue screen.
Press the source but ton repeatedly • on the re mote control of your TV.
Tip
The video-in chann el is between the lowe st • and highest channels and may be called
FRONT, A/V IN, VID EO etc. See the TV us er
manual on how to select th e correct input o n
the TV.
Select the correct TV system
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1 Press SYSTEM MENU.
2 Select [Video Setup].
3 Select [TV System] and then press .
4 Select a setting and then pr ess OK.
• [NTSC] - For T V with NTSC color
system.
• [PAL] - For TV with PAL colo r
system.
• [Multi] - For TV t hat is compatible
with both PAL and NTSC.
5 To exit the menu, press SYSTEM MENU.
Change system menu
language
1 Press SYSTEM MENU.
2 Select [General Setup].
3 Select [OSD languag e] and then press .
4 Select a setting and then pr ess OK.
5 To exit the menu, press SYSTEM MENU.
EN