Activate/deactivate alarm timer
1In the standby mode, press SLEEP/TIMER repeatedly.
»If timer is activated, 
is displayed.
»If timer is deactivated, 
disappears on the display.
Tip
•Alarm timer is not available when the source is set as “MP3 LINK” or “AUX”.
•If CD/USB/iPod/iPhone source is selected but no disc is placed or no USB/iPod/iPhone connected, the system switches to FM automatically.
Set the sleep timer
This apparatus can switch to standby automatically after a set period.
1When the apparatus is turned on, press SLEEP/TIMER repeatedly to select a preset period (in minutes).
»When sleep timer is activated, 
is displayed.
To deactivate sleep timer
1Press SLEEP/TIMER repeatedly until [SLE OFF] is displayed.
Listen to an audio device
You can listen to an audio device through this apparatus.
1Ensure the external audio device is connected to this apparatus (see “Connect” > “Connect an external audio device”).
2Press MP3 LINK/AUX repeatedly to select the audio input through the
3Start to play the device (see the device user manual).
Listen through headphone
1Plug a headphone into the 
socket.
11Product information
Note
•Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output | 2 X 30 W RMS |
Power |
|
Frequency | 40 Hz - 20000 Hz, ±3 |
Response | dB |
Signal to Noise | > 65 dB |
Ratio |
|
Aux Input | 1 V RMS 20k ohm |
Disc
Laser Type | Semiconductor | |
Disc Diameter | 12 cm/8 cm | |
Video Decoding | ||
Video DAC | 12 Bits | |
Signal System | PAL / NTSC | |
Video Format | 4:3 / 16:9 | |
Video S/N | > 48 dB | |
Audio DAC | 24 Bits / 96 kHz | |
Total Harmonic | < 0.8% (1 kHz) | |
Distortion |
|
|
Frequency | 4 | Hz - 20 kHz (44.1 kHz) |
Response | 4 | Hz - 22 kHz (48 kHz) |
| 4 | Hz - 24 kHz (96 kHz) |
S/N Ratio | > 65 dBA | |
24EN
