Declaration of conformity
We
Philips Consumer Electronics Route d’Angers
72081 Le Mans Cedex 9 France
Declare that the products DECT 511xx and DECT 515xx are in compliance with the Annex III of the
Article 3.1.a (protection of the health & the safety of the user) : EN
Article 3.1.b (protection requirements with respect to electromagnetic compatibility : ETSI EN 301
Article 3.2 (effective use of the radio spectrum) EN 301 406 (2003)
The presumption of conformity with essential requirements regarding Council Directive 1999/5/EC is ensured.
Date : 10/05/2004 Le Mans
Quality Manager, Home Communication
Using GAP standard compliance
The GAP standard guarantees that all DECTTM GAP handsets and base stations comply with a minimum operating standard irrespective of their make.Your DECT 511/515 handset and base station are GAP compliant, which means the minimum guaranteed functions are : register a handset, take the line, receive a call and dial.The advanced features may not be available if you use another handset than a DECT 511/515 with your base station.
To register and use your DECT 511/515 handset with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure page 28.
To register a handset from another make to the DECT 511/515 base station, place the base station into registration mode (page 28), then follow the procedure in the manufacturer’s instructions.
Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.
A financial contribution has been paid to the associated national recovery & recycling system. 
The labelled packaging material is recyclable.
DECTTMis a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.
Declaration of conformity | 13 |
http://www.philips.com/faqs/dect
