Enable registration, Line settings, Base station | Philips DECT511

Base station

Enable registration

Line settings

Service code settings

Enable registration

This feature allows you to register a DECT peripheral without keypad. Some DECT peripherals, such as repeaters, do not have any keypad. A special menu-operated procedure is used to register such peripherals to the base station. Also use the peripheral instructions to register it to the base

To register a DECT peripheral

Press to enter the carousel menu

Scroll to Base station and select

Press to select Enable registration

Enter the peripheral code (RC code) and press OK

Follow the instructions in the peripheral manual

Line settings

To change the dial mode

Press to enter the carousel menu

Scroll to Base station and select

Scroll to Line settings and select

Press to select Dial mode

Press to select Tone or scroll to Pulse and select

Note: this setting allows you to select pulse dialling (also called “Loop disconnect” and used in countries without DTMF tone dialling capability or using old PABX)

54	Base station

http://www.philips.com/faqs/dect

Image 55

Philips DECT511 Enable registration, Line settings, Base station, To register a Dect peripheral, To change the dial mode

Contents

Charge the handsets 24 hours before use Store Quick start guide Earpiece Microphone Dect 511/DECT Handset Icons on the handset display Skip/Fast forward key Base stationPaging key Play/Stop key Table of contents Intercom Operator services ExtraTroubleshooting Answer machine SMS Menu structure Handset list Only available in the UK Menu structure Choose country/oper First ring On or Off Conformity,Environment and Safety Declaration of conformity Using GAP standard compliance Unpacking your Dect Installing the Dect 511/515 Installing and replacing the batteries in the handset Installing the base stationBattery life and range Philips screen saver Idle modeHow to navigate in the menus Introduction Basic principles Call features Editing systems Case modeStandard multi-tap system Keypad Keys Multi-tap Sequence To send an SMS to a phone Send new SMS To read an SMS/to view the number Read SMS To forward an SMS To reply to an SMS To delete an SMS To send againTo copy a number to the phonebook To set your personal SMS boxes only available in the UK SMS settingsTo set the SMS mode To call from the SMS list To choose by default an SMS centre To set the SMS centre numbers To register a handset To activate/deactivate the babysit modeRegistration Handset To rename a handset Rename handsetDate & time To select a base station Backlight Display contrastScreen saver Saved messages To switch the Dect 515 Telephone Answer Machine ON/OFF To delete a message via the base station To play and browse through saved messages via the handsetTo play and go to next saved messages via the base station To delete a message via the handset To select the answer mode and the outgoing message OGM type SettingsTo record your personal outgoing message OGM To set the voice language To set the number of rings before answering To set the call screening To activate and deactivate the remote controlTo set the recording quality To remotely control your answer machine To change the remote control code To listen to a saved memo Record and listen to a memoTo record a memo To listen to a new memo Call transfer via the in-call options Fast call transfer when on lineCall transfer to a specific handset when on line Internal call Conference call via the in-call options To add a name to the phonebook Group settingsAdd new View To change a number To callTo change a name To delete an entry To change the SMS box number only available in the UKTo send an SMS from the phonebook To listen to a message Dect 515 only To view the call logTo call / redial To send an SMS from the call log To view the numberTo store the caller’s number To delete a name and a number Scroll to Delete all Call log settingsDelete all To delete all the call log To deactivate call forward Operator servicesExample of service Call forward To activate call forward Call duration Alarm clockTo set the alarm clock To activate / deactivate the alarm clock To set the alarm ring tone type and ring tone volume Do not Disturb modeTo set the Do not Disturb mode To set the internal ring tone ring tone for internal calls Handset ring tonesBase ring tones To set the external ring tone Group ring tones Handset ring tone volumeTo set the group ring tones To record a new melody My ring tonesTo delete a downloaded ring tone To play a recorded melody To delete a recorded melody To set the base loudspeaker volume only available for DectTo set the earpiece tone To set the notification beep To set the key & feedback tonesTo activate/deactivate the music on hold Base station Enable registrationLine settings To change the dial mode To change the recall type To change the configurationTo activate and deactivate the first ring Service code settings FAQ FAQ Problems Problems Causes Solutions PABX/PSTN IRL Information on Text Messaging SMS in Eire Information on Text Messaging SMS in the UK Page Download of ring tones