Philips DMR-EH55 Main unit, Unit’s display, Control reference guide, Opening the front panel

Main unit

1 2 3 4 5

OPEN/CLOSE	DRIVE	REC
	SELECT

CH k1.3

			S VIDEO IN	VIDEO IN L/MONO -AUDIO IN- R
6		DV IN			AV3
				7				8 9 : ; <	=
	Opening the front panel
	Press down on the
	part with your finger
1 Standby/on switch (Í/I) (➡ 17)						8 Open/close disc tray (➡ 20, 28)
	Press to switch the unit from on to standby mode or vice versa. In					9 Select drive (➡ 20, 28, 34)
	standby mode, the unit is still consuming a small amount of power.						Drive changes each time you press [DRIVE SELECT].
2 Disc tray (➡ 20, 28)						: Stop (➡ 20, 29)
3 Connection for digital video (DV) camcorder (➡ 52)						; Start play (➡ 28)
4 SD card slot (➡ below)						< Start recording (➡ 20)/Specify a time to stop recording (➡ 22)
5 Display (➡ below)						= Remote control signal sensor

6Connection for camcorder etc. (➡ 52)

7 Channel select (➡ 20) Rear panel terminals (➡ 14–16)

Control reference guide

Inserting, Removing the SD card

When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card. Such action may result in malfunction or loss of the card’s contents.

≥Inserting foreign objects can cause a malfunction.

≥You can use SD Memory Cards with capacities from 8 MB to 2 GB (➡ 7).

Opening the cover

Press the protruding part to open the cover.

Inserting the card

Press on the centre of the card until it clicks into place.

If you are using a miniSDTM card, insert it into the miniSDTM card adaptor that comes

Removing the card

1Press on the centre of the card.

2Pull it straight out.

Closing the cover

Press down.

with the card.

ADAPTER

Insert and remove this adaptor from the unit.

Insert the card label up with the cut-off corner on the right.

(Do not forget to close the cover. ➡ right)

Automatic drive select function

≥If you insert an SD card while the unit is stopped, the “SD Card” screen is displayed. Select an item and press [ENTER] to switch to the SD drive ( ➡ 34, 50).

If you remove an SD card, the HDD drive is automatically selected.

The unit’s display

1 2

		REC
		PLAY	3
			4
5	6	7
1 Recording	Playback	Recording/Playback

RECREC

PLAY PLAY

2Timer recording indicator

3Lights when the SD card is inserted in the card slot.

4Lights when a disc that is supported by this unit is inserted in the tray.

5Lights when the HDD, DVD or SD drive is selected

6Main display section

7 Recording mode	RQT8361
	13