Philips DMR-EH55 Television operation, Test by turning on the television and changing channels

Television operation

You can configure the remote control TV operation buttons to turn the television on/off, change the television input mode, select the television channel and change the television volume.

	DVD	TÍV
Turn TV on/off	Í		Volume
	DRIVE	CH	VOLUME
	SELECT	AV	Channel
Input select
	1	2 3	Select

CH

4 5 6

1 Point the remote control at the television

While pressing [Í TV], enter the code with the numbered buttons.

e.g., 01:	[0] ➡ [1]	10:	[1] ➡ [0]
Manufacturer and Code No.
Brand			Code
Panasonic/National		01, 02, 03, 04
GOLDSTAR/LG		15, 16
HITACHI		08
JVC		07
MITSUBISHI		09, 10
NEC		13
PHILIPS		12
SAMSUNG		12, 17, 18
SANYO		14, 19
SHARP		11
SONY		05
TOSHIBA		06

2 Test by turning on the television and changing channels.

≥Repeat the procedure until you find the code that allows correct operation.

≥If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television.

[Note]

≥If your television brand has more than one code listed, select the one that allows correct operation.

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.

Use “DVD 1”, the factory set code, under normal circumstances.

1 While stopped

Press [FUNCTIONS].

2 Press [3, 4] to select “To Others” and press [ENTER].

3 Press [3, 4] to select “Setup” and press [ENTER].

4 Press [3, 4] to select “Others” and press [1].

5 Press [3, 4] to select “Remote

Control” and press [ENTER].

6 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or “DVD 3”) and press [ENTER].

Setup	Remote Control
	Press “±” and “ENTER” together
Tuning	for more than 2 seconds on the remote
Disc	control.
Picture

To change the code on the remote control

7 While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds.

8 Press [ENTER].

∫When the following indicator appears on the unit’s display

The unit’s remote control code

Change the code on the remote control to match the main unit’s (➡ step 7).

[Note]

Executing “Shipping Condition” in the Setup menu returns the main unit code to “DVD 1”. Change the remote control code to 1

(➡ step 7).

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

STEP 3 Set up to match your television and remote control

RQT8361

19