UsingmoreofyourHDreceiver26
Note
ResettingyourHDreceivertothefactory
defaultsettingserasesallofyourpreferences
andsettings.Forexample,allofyourfavourite
listsandrecordingtimerswillbeerased.
Changing other system settings
From the Settingsmenu,use / to
highlight Set-upandpress or OK.
TheSet-upmenuappears.
 Toturnonoroffthechannelupdates
thatautomaticallyhappenwhenyourHD
receiverisintheactive-standbymode,make
sure Channel installationishighlighted
andpress or OK. Press to highlight
Automatic updateandpress or OK.
Use / to highlight On or Off.
Press or BACK tosaveyourchanges
andreturntothepreviousmenu.
Tocheckthesignalqualityofanychannel
thatyouarereceiving,press to highlight
Signal qualityandpress or OK.
IntheSignal quality testmenuthat
appears,use / toselectachannelthat
youwanttocheck.Press or BACK to
returntothepreviousmenu.
Toturnonoroffpoweringyouractive-
indoor antennausingtheAntenna IN
connectorontherearpanelofyourHD
receiver,press to highlight Antenna
poweringandpress or OK. Use / to
highlight Off or On.
Press or BACK tosaveyourchanges
andreturntothepreviousmenu.
 YourHDreceiverlocatesthesoftware
availableonyourUSBmemorystickand
displaysaconrmationmessage.Press
the greenbuttontoinstallthesoftware
immediately.Presstheredbuttontocancel
andreturntothepreviousmenu.Ifyou
press the greenbutton,yourHDreceiver
updatesthesoftwareandrestarts.Youmay,
dependingontheupdate,thenberequired
tocompletetherstinstallationsetup(see
page10).
Restoring factory default settings
From the Settingsmenu,use / to
highlight Set-upandpress or OK.
 IntheSet-upmenuthatappears,
use / to highlight Factory resetand
press OK twice.
 Amessageappearsaskingyoutoconrm.
Ifyouaresure,pressthegreenbutton,or
press the redbuttontocancelandreturn
tothepreviousmenu.Ifyoupressthe
greenbutton,yourHDreceiverrestores
thefactorydefaultsettingsandrestarts.You
willthenberequiredtocompletetherst
installationsetup(seepage10).