Philips DVD750VR/17 DVD/VCR to a TV that has an S-Video In jack, Antenna/Cable TV Signal

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 13

Hookups (cont’d) 13

DVD/VCR to a TV that has an S-Video In jack

1

Antenna/Cable

TV Signal

DVD/VCR VCR				DVD
AUDIO OUT AUDIO IN			S-VIDEO COMPONENT AUDIO		DIGITAL
ANT-IN			OUT VIDEO OUT	OUT	AUDIO OUT
L			Y
R			Pb/	L
			Cb
ANT-OUT VIDEO OUT VIDEO IN	PROGRESSIVE		Pr/		COAXIAL
	I	P		R
			Cr

2

AUDIO IN

LEFT

S-VIDEO IN

RIGHT

3

1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

2 Connect the supplied red and white audio cables to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors.

3 Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV.

The S-Video connection only supplies video (picture) for the DVD Player of the DVD/VCR.Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable. To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the supplied yellow video cable, see step 3 on page 11.

4 Connect the power cords of the DVD/VCR and TV to a power outlet. Turn on the TV and set it to the S-Video In channel for DVD Player features.

If you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at the TV. If you are using the yellow video cable for VCR playback, choose the Video In channel at your TV.To find the correct Video In channel, go to your lowest TV channel and change channels downward until you see VCR or DVD playback on the TV screen, or try channel 3 or 4 at the TV.

To help you find the right S-Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the S-Video In channel.

5 You are ready to turn on the DVD/VCR. Go to page 17 before turn- ing on the DVD/VCR.

6 After you complete the VCR setup as described on page 17, set DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details are on page 72. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the TV speakers.