Philips DVD750VR/17 owner manual Stereo

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 15

Hookups (cont’d) 15

DVD/VCR to a TV and to a Stereo that is Dolby Digital-compatible

Using Digital Audio connections

1 Antenna/Cable TV Signal

DVD/VCR VCR					DVD
			S-VIDEO COMPONENT AUDIO			DIGITAL
AUDIO OUT AUDIO IN
ANT-IN			OUT	VIDEO OUT	OUT	AUDIO OUT
				Y
L	L
R	R			Pb/	L
				Cb
ANT-OUT VIDEO OUT VIDEO IN		PROGRESSIVE				COAXIAL
				Pr/
		I	P		R
				Cr
						Stereo
3 VIDEO IN				2
Back of TV						COAXIAL
(example only)						DIGITAL
						AUDIO IN

1

2

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL AUDIO IN jack on the Stereo.

This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the supplied red/white audio cables.To connect the supplied RF coaxial cable, see step 2 on page eight.To connect the red/white audio cables, see step 2 on page 11.

3 Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use component video cable or S-Video cable instead for the DVD Player, see pages 12- 13.You will still need the yellow video cable or RF coaxial cable for VCR features.

4 Plug in the power cords of the Stereo,TV, and DVD/VCR.Turn on the Stereo and select its Auxiliary IN channel.Turn on the TV and set it to the correct Video In channel. Go to your TV’s lowest channel (01 or 02) and change channels downward until you see DVD or VCR material on the TV screen. To help you find the right Video In channel on the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Video In channel.

5 You are ready to turn on the DVD/VCR. Go to page 17 before turning on the DVD/VCR.

Remember...

Some DVDs are recorded in 5.1 channel Dolby Digital Surround. Select 5.1 channel Dolby Digital Surround Sound in the DVD Disc menu. If Dolby Digital Surround is not recorded on the Disc, you will not have surround sound available.

If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to ON in the DVD Player’s Setup menu. Details are on page 72. If the DVD/VCR is not connected to a Dolby Digital-compatible Stereo, set DOLBY DIGITAL to OFF. Incorrect settings may cause noise distortion and damage the speakers.