Philips DVD750VR/17 Helpful Hints, DVD/VCR has no power, There is no picture in DVD mode

H9420UD(p52-84).QX4 03.7.18 0:07 PM Page 78

78 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before requesting service.You may be able to solve the problem yourself.

If you need to call a customer service representative, please know the model number and serial number of your product before you call.This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.

The DVD/VCR has no power.

•Make sure the power cord is connected completely to an AC (alternating current) outlet.

•Press the STANDBY-ON button to turn on the DVD/VCR.The DVD/VCR turns on in the mode it was in when you turned it off. If there has been a power failure, it will turn on in VCR mode. Press DVD to put the unit in DVD mode. Press VCR to put the unit in VCR mode. Or, press OUTPUT on the front of the DVD/VCR to switch between the two modes.

The remote control will not operate the DVD/VCR.

•Aim the remote control directly at the remote sensor (IR) on the front of the DVD/VCR, not toward the TV. Details are on page 22.

•Remove all obstacles between the remote control and the DVD/VCR.

•Inspect and/or replace the batteries in the remote control. Details are on page 16.

•Use the remote control within 23 feet of the DVD/VCR.

•When using the DVD Player, press the DVD button, then try the other DVD feature buttons. Press DVD so the red DVD light appears on the front of the DVD/VCR.This means the DVD/VCR is in DVD mode.

•To use the VCR, press VCR, then try the other VCR feature buttons. Press VCR so the green VCR light appears on the front of the DVD/VCR.This means the DVD/VCR is in VCR mode.

There is no picture in DVD mode.

•Make sure the video cable is connected correctly.You may connect either the yellow video cable (sup- plied), an optional S-Video cable, or optional component video cables. Make sure the TV is set to the cor- rect Video In channel (usually the AUX IN,A/V IN,Auxiliary In, EXT or External In, Component Video In,

or S-Video In channel). Check your TV owner’s manual for details. Details are on pages 11-15.

•If you only used the supplied black RF coaxial cable, details are on pages 8-10.Make sure the TV is set to channel 3 or 4 (the output channel of the DVD/VCR). Or, if you have a Cable Box/Satellite Receiver, make

sure the TV is set to the Cable Box/Satellite Receiver output channel (usually 03 or 04).

•Insert a DVD that is playable on this DVD/VCR. Details are on page six.

•Make sure the DVD/VCR is in DVD mode. Press DVD or OUTPUT so the red DVD light appears on the front of the DVD/VCR.

•Check if the INTERLACE/PROGRESSIVE SCAN SELECTOR is set correctly according to your TV.

Disc cannot play.

•Insert a playable Disc. Details are on page six.

•Place the Disc correctly in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label

facing up. If the Disc is two-sided, make sure the label of the side you want to play is facing up.

•Clean the Disc. Make sure the Disc is not scratched or warped.

•Cancel the Parental Controls, enter the password, or change the control level. Details are on pages 60-61.

•Make sure the Disc is labelled for use in Region 1 or ALL regions and is NTSC compatible. Details are on page six.