42

Timer Recording with the VCR Plus+ Programming System

Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide.Before you begin:
Set up the channels at the VCR (page 26-27).
Set up the VCRPlus+ and Cable/TV channel numbers (pages
40-41).
Set the clock (pages 28-29).
Put a tape in the VCR.
• The number you entered may flash
on the screen after step 3 if you
enter an incorrect PlusCode program-
ming number (for example,one that
is too short).The previous screen will
appear.Enter the correct PlusCode
programming number.
• If the number you entered flashes on
the screen after step 3,the timer
recording you just programmed and
another timer recording overlap.The
current timer recording will not occur.
• You may use the VCR Plus+
Programming System to record pro-
grams on Cable TV channels up to
channel 125.
With ShowGuard,if the power fails
for more than 30 seconds,pro-
grammed timer recordings will be
restored when the clock is reset.
Helpful Hints
3
2-3
1
1Press VCR.
2Press VCR Plus+.
3Press Number buttons to enter the PlusCode pro-
gramming number of the program you wish to
record.
Then,press VCR Plus+.
4Press oor pto select a ONCE,DAILY,or WEEKLY
recording.Then,press B.
ONCE:The VCR will record a TVprogram on any day
you choose,up to 12 months away.
DAILY:The VCR will record a program every day from
Monday to Friday – starting at the same time and record-
ing for the same length of time.
WEEKLY:The VCR will record a program on the same
day,at the same time, and for the same length of time
every week.
VCR Plus+system
BONCE
DAILY
WEEKLY
VCR Plus+system
PlusCode No.: – – – – – – – –
VCR Plus+system
PlusCode No.: 1 2 3 4 5 – – –
STANDBY-ON
PLAY
VCR/TV
VCRDVD
OK
MENU MENU
SYSTEM
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
DISC/VCR
PAUSESTOP
VCR Plus+ RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
890
+10
4
H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 42