Initial Settings
In this menu system, there are several ways to cus- tomize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.
General Operation
1.Press SYSTEM MENU and the Setup menu appears.
2.Use v / V to select the desired option.
3.While the desired item is selected, press B to move to the second level.
4.Use v / V to select the second desired option.
5.Press B to move to the third level.
6.Use v / V to select the desired setting then press OK to confirm your selection.
Some items require additional steps.
7.Press SYSTEM MENU to exit the Setup menu.
Note:
Press b to go back to the previous level.
General Settings
Tuning Band Select
1.Select the [Tuning Band] option then press B .
2.Use v / V to select the tuning band (TV or CATV) option then press OK.
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
Auto Channel Set
Connect the Recorder to the desired type of antenna or cable TV system as shown on page 15.
This Recorder is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels
1.Select the [Tuning Band] option.
2.Use B / v / V to select [START] icon.
3.Press OK to begin the channel search.
The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.
Note:
After the Auto Channel Set proceeding is complete, make sure the Tuning Band is set appropriately (TV or CATV) on tuning band, follow steps 1~2 as shown previous (Tuning Band Select) to choose the correct Tuning Band (TV or CATV).
16
