Philips DVP3050V 2, 6, 3, 4 5 6

English
Video Cassette Playback 15
• Other tape playback features are
on pages 29-32.
• If AUTO REPEAT is ON,playback
will begin when you insert a tape,
even when the record tab is
intact.Details are on page 29.
• You must connect the DVD/VCR
to a TV using the RF coaxial
cable or the audio/video cables in
order to use the VCR features.
These hookups are explained on
pages 7 and 10.
Helpful Hints
Read and follow the steps below to play a tape.
1Turn on the TV.Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel.This depends on how you
connected the DVD/VCR to a TV.
Details are on pages 6-12.
2With the DVD/VCR power off,insert a tape in the
cassette compartment of the DVD/VCR.VCR light
will appear on the front of the DVD/VCR.If the tape’s
record tab has been removed,playback will start
automatically.
If the DVD/VCR power is already on,press VCR to put the
DVD/VCR in VCR mode if necessary.VCR light will appear
on the front of the DVD/VCR.
3If playback does not start automatically,press VCR,
then press PLAY B.
4Press STOP Cto stop playback.
5Press hto rewind the tape.
6After the tape stops,press STOP/EJECT CA on the
front of the DVD/VCR to remove the tape.
1
2
6Press STOP/EJECT C A
on the DVD/VCR.
Turn on the TV.
Insert a tape in the
DVD/VCR.
STANDBY-ON
PLAY
DVDVCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM ANGLE
REPEAT REPEAT AUDIO
SEARCH MODE DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
890
+10
3
4
5
H9821MD_DFU_EN1_0214 2/14/05 11:14 AM Page 15