Philips DVP3050V user manual Cable, Signal, RF coaxial cable TV’s Antenna

H9821MD_DFU_EN1_0214 2/14/05 11:14 AM Page 9

Hookups (cont’d) 9

DVD/VCR to Cable Box or Satellite Receiver and TV

Using only basic RF coaxial cables

This connection will let you use the features of both the VCR and the DVD Player.

DVD/VCR			2
	1	Cable		Cable Box/Satellite Receiver
		Signal				C T /
ANT - IN						75
						AN
ANT-OUT				IN		ABLE
				OUT
RF coaxial cable
				RF coaxial cable	3	TV’s ANTENNA
						IN Jack
Connections

1 Connect a Cable TV or Satellite signal to the DVD/VCR’s ANT-IN (Antenna In) jack.

2 Use an RF coaxial cable (as the one supplied) to connect the ANT-OUT (Antenna Out) jack on the DVD/VCR to the IN jack on the Cable Box/Satellite Receiver.

3 Use a second RF coaxial cable to connect the OUT jack on the Cable Box/Satellite Receiver to the ANTENNA IN jack on the TV.

4 Plug in the power cord of your TV. Turn on the TV and set it to channel 3 or 4.

5 Plug in the power cord of the DVD/VCR.You are ready to turn on the DVD/VCR. Go to page 14 before turning it on.

Remember...

There are two ways to connect your Cable Box/Satellite Receiver to the

DVD/VCR.With the connection on this page:

●You may watch one channel while recording another. Follow these steps: 1) Put the Cable Box/Satellite Receiver on the same channel as the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when the DVD/VCR is new.To alternate it between 3 and 4, press and hold (VCR) PLAY B on the front of the DVD/VCR for 3-5 seconds during tape playback. For details, see step 4 on page 7. Set the TV

to the Cable Box/Satellite Receiver output channel (03 or 04).

2)Press VCR to put the DVD/VCR in VCR mode.VCR light will appear on the front of the DVD/VCR.

3)Press VCR/TV on the remote to choose VCR position.

4)Press SKIP ∑/CH K or SKIP w/CH L to select the channel you want to record at the DVD/VCR. Press RECORD I to start the recording.

5)Press VCR/TV on the remote once to put the DVD/VCR in TV position.

6)Select the channel you want to watch at the Cable

Box/Satellite Receiver.

●When you play a tape or Disc, make sure the Cable Box/Satellite Receiver is set to the DVD/VCR’s output channel (03 or 04).

Set the TV to the Cable Box/Satellite Receiver output channel (03 or 04).

English