![](/images/new-backgrounds/1215340/21534021x1.webp)
Connect to digital ampli er/receiver | Connect USB device |
DIGITAL IN
DIGITAL
OUT
COAXIAL
1Connect a coaxial cable (not supplied) to the COAXIAL/DIGITAL OUT jack on this DVD player and the COAXIAL/DIGITAL input jack on the device.
Tip |
• You can optimize the audio output (see chapter |
‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio |
]) for details. |
Connect
1Connect the USB ash drive to the (USB) jack on this DVD player.
Note
•This DVD player can only play/view MP3, WMA, DivX or JPEG les that are stored on such devices.
• Press to access the content and play the les.
Connect to analog stereo system
AUDIO IN
FRONT L
FRONT R
1Connect the audio cables (supplied) to the AUDIO OUT FRONT L/R jacks on this DVD player and the audio input jacks on the device.
Tip |
• You can optimize the audio output (see chapter |
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output |
]) for details. |
Connect to power outlet
Warning
•Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the DVD player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up for use.
11