9
Connect
3 Connect Make the following basic connections to use the
DVD player.
Basic connections:
Video cables•
Audio cables•
Optional connections:
Audio to other devices:•
Multi channel receiver•
Digital ampli er/receiver•
Analog stereo system•
Note
Refer to the typ e plate at the rear o r bottom of the •
product for id enti cation and supply rat ings.
Before you make or c hange any connec tions, ensur e
•
that all the devi ces are disconne cted from the po wer
outlet.
Tip
Different t ypes of connec tors may be used to •
connect this p roduct to your T V, depending on
availabilit y and your needs . A comprehensi ve
interacti ve guide to help you co nnect your pro duct is
available at www.connectivityguide.philips.com.
Connect video cables
Connect this DVD player to the TV to view
disc play.
Select the best video connection that the TV can
support.
Option 1:• Connect to component video
jacks (for a standard TV or Progressive Scan
TV).
Option 2:• Connect to video (CVBS) jack
(for a standard TV).
Note
You must connect th is DVD player dire ctly to a TV.•
Option 1: Connect to component
video jacks
Pb
COMPONENT
VIDEO IN
Y
Pr
Pb
COMPONENT VIDEO OUT
YPr
1 Connect the component video cables (not
supplied) to the Y Pb Pr jacks on this DVD
player and the component video input
jacks on the TV.
If a progressive scan TV is used, you •
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tip
The component v ideo input jack s on the TV may be •
labeled as Y Pb/C b Pr/Cr or YUV.
This type of conn ection provi des good pictur e
•
quality.