Turn on Progressive Scan
Connect a progressive scan TV with component video sockets (see chapter ‘Connect video cables - Option 2: Connect to component video sockets’ for details).
1Turn on the TV to the correct viewing channel for this DVD player.
2Press SETUP.
3Press V to select [ Video Setup ].
4Select [ Component Video ] > [ Interlaced ], then press OK.
5Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
Video Setup
TV System | On |
TV Display | Off |
Progressive |
|
Picture Setting
Component Video
HD JPEG
HDMI Setup
6To proceed, select [ OK ] and press OK. The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.
•If no picture displayed, turn off the progressive scan mode as follows:
1)Press Z to open the disc compartment.
2)Press the numeric button ‘1’.
7To exit the menu, press SETUP.
8You can now turn on the progressive scan mode on the TV (see the TV user manual).
Note
•The progressive scan setting will not be available when the HDMI video signal is detected.
•During play, when progressive scan mode is on for both this DVD player and the TV, distorted picture may display. Turn off the progressive scan feature on both this DVD player and the TV.
English
Get started
EN 15
