4 EN
This product complies with the radio
interference requirements of the European
Community. This product complies with the
requirements of the following directives and
guidelines: 2006/95/EC, 2004/108/EC.
This product is in compliance with the EEE
directive.

About Progressive Scan

Consumers should note that not all high de nition
television sets are fully compatible with this
product and may cause artifacts to be displayed in
the picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard de nition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer service
center.

Recycle notice

Your product is designed and manufactured
with highly quality material and components,
which can be recycled and reused. When this
crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by
the European Directive 2002/96/EC.
1 Important
Safety and important notice
Warning
• Risk of overheati ng! Never inst all the DVD player
in a con ned space. Always leave a spa ce of at least
four inches aro und the DVD player for v entilation.
Ensure the cur tains or othe r objects neve r cover the
ventilation s lots on the DVD playe r.
Never place the DV D player, remote contr ol or
•
batteries n ear naked  ames or other heat sour ces,
including dir ect sunlight .
Only use this DVD p layer indoors . Keep this DVD
•
player away from water, moisture and liquid- lled
objects.
Never place this DV D player on other el ectrical
•
equipment.
Keep away from th is DVD player durin g lightning
•
storms.
Where the mai ns plug or an applia nce coupler is
•
used as the disco nnect device , the disconnec t device
shall remain r eadily opera ble.
Visible and inv isible laser r adiation when o pen. Avoid
•
exposure to bea m.
Mains fuse (U.K. only)
This DVD player is  tted with an approved
moulded plug. Should it become necessary to
replace the mains fuse, this must be replaced
with a fuse of the same value as indicated on
the plug (example 10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with BS
1362 and have the ASTA approval mark. If
the fuse is lost, contact your dealer in
order to verify the correct type.
3 Re t the fuse cover.
In order to maintain conformity to the
EMC directive, the mains plug on this
product must not be detached from the
mains cord.