[ HDMI Setup ]
When you connect this DVD player and the TV with a HDMI cable, select the best HDMI setup that the TV can support.
•[ Resolution ] – select a video resolution that is compatible with the TV display capability.
Option | Description |
[ Auto ] | It detect and select |
| the best supported |
| video resolution |
| automatically. |
|
|
[ 480i ], [ 480p ], | Select a video |
[ 576i ], [ 576p ], | resolution that best |
[720p ], [ 1080i ], supported by the TV.
[ 1080p ] | See the TVs manual |
| for details. |
|
|
Note
•If the setting is not compatible with the TV, a blank screen appears. Wait for 15 seconds for auto recover or switch to its default mode as follows:
1)Press Z to open the disc compartment.
2)Press numeric button ‘1’.
•[ Wide Screen Format ] – de ne the wide screen format for disc play.
Option Description
[Superwide ] Centre position of the screen is stretched less than the side. This setting is only applicable if the video resolution is set to 720p or 1080i/p.
[4:3 Pillar No stretching of the
Box ] | picture. Black bars are |
| displayed on both sides |
| of the screen. This |
| setting is only applicable |
| if the video resolution is |
| set to 720p or 1080i/p. |
|
|
[ Off ] | Picture will be displayed |
| according to the format |
| of the disc. |
|
|
Note
•This setting is only available if you have set the [ TV Display ] setting to [ 16:9 ].
•[ EasyLink Setup ] – if this DVD player is connected to HDMI CEC compliant TV/devices, all connected devices can respond to the following commands simultaneously:
Option Description
[EasyLink ] Turn off or turn on all EasyLink features.
•To disable this feature, select [ Off ].
[One Touch When you press the
Play] | STANDBY button, it |
| turns on the TV and this |
| DVD player, then video |
| disc play starts (if a video |
| disc is found in the disc |
| compartment). |
| • To disable this feature, |
| select [ Off ]. |
[One Touch When you press and Standby ] hold the STANDBY
button, all connected HDMI CEC devices switch to standby mode simultaneously.
•To disable this feature, select [ Off ].
Note
•Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.
•You must turn on the HDMI CEC operations on the TV/devices before you can enjoy the EasyLink controls. See the TVs/devices manual for details.
English
Adjust settings
EN 31
