12 EN
Connect to analogue stereo system
AUDIO IN
1 Connect the audio cables (not supplied) to
the AUDIO OUT L/R sockets on this
DVD player and the audio input sockets
on the device.
Tip
You can optimise the a udio output (see ch apter •
‘Adjust setti ngs’ - [ Audio Setup ] > [ An alogue
Output ]) for details.
Connect USB device1 Connect the USB ash drive to the
(USB) socket on this DVD player.
Note
This DVD player ca n only play/view MP 3, WMA, •
DivX or JPEG les that are stored o n such devices.
Press
• to access the conte nt and play the les.
Connect to power outletWarning
Risk of produc t damage! Ensu re that the power •
supply volta ge correspond s to the voltage pr inted on
the back or the und erside of the DV D player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.