Philips DVP3552K/98 user manual Adjust settings, General setup, Audio setup

7 Adjust settings

Note

•If the setup option is grayed out, it means the setting cannot be changed at the current state.

General setup

1Press SETUP.

» [General Setup] menu is displayed.

2Press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press SETUP.

[Disc Lock]

Set the play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked).

•[Lock] - Restrict the access to the current disc. At the next time when you want to play this disc or unlock it, you need to enter the password.

•[Unlock] - Play all discs.

[OSD Language]

Select a language for on-screen menu. [Sleep Timer]

Switch automatically to standby at the preset time.

•[Off] - Disable sleep mode.

•[15 Mins], [30 Mins], [45 Mins], [60 Mins] - Select the countdown time for this product to switch to standby.

[Auto Standby]

Turn on/off the auto standby mode.

•[On] - Switch to standby after 15 minutes of inactivity (for example, in pause or stop mode).

•[Off] - Disable the auto standby mode.

[DivX(R) VOD Code]

Display the DivX® registration code and deregistration code.

•[Registration] - Obtain a registration code to register this product on website.

•[Deregistration] - Obtain a deregistration code to cancel the registration of this product on website.

Note

•Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Audio setup

1Press SETUP.

» [General Setup] menu is displayed.

2Press to select [Audio Setup], and then press to enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press BACK .

•To exit the menu, press SETUP. [Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

• [LT/RT] - For the surround sound output through two speakers.

• [Stereo] - For the stereo output. [Digital Audio]

Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).

• [Digital Output] - Select a type of digital output.

•[All] - Support multi-channel audio formats.

•[Off] - Disable digital output.

14EN