Philips DVP3552K/98 user manual Video setup, PCM Only Downmix to two-channel audio format

•[PCM Only] - Downmix to two-channel audio format.

•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

•[48kHZ] - For discs recorded at sampling rate of 48 kHz.

•[96kHZ] - For discs recorded at sampling rate of 96 kHz.

Note

•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

•The higher the sampling rate, the better the sound quality.

[Volume]

Set the default volume level when you play a disc.

1.Press OK.

2.Press to set the volume.

3.Press OK to confi rm and exit.

[Sound Mode]

Select a preset sound effect to enhance the audio output.

•[3D] - Select a virtual surround sound effect that is produced from the left and right audio channels.

•[Movie Mode] - Select a sound effect for movies.

•[Music Mode] - Select a sound effect for music.

[CD Upsampling]

For better sound quality in stereo mode, convert the music CD to a higher sampling rate.

•[Off] - Turn off CD-upsampling.

•[88.2kHz] - Convert to twice the original sampling rate.

•[176.4kHz] - Convert to four times the original sampling rate.

[Night Mode]

Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.

•[On] - Enjoy quiet viewing at night.

•[Off] - Enjoy surround sound with a full dynamic range.

Note

•Applicable only to Dolby Digital encoded DVDs.

Video setup

English

1Press SETUP.

» [General Setup] menu is displayed.

2Pressto select [Video Setup], and then pressto enter the submenu.

3Select an option, and then press OK.

4Select a setting, and then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press SETUP.

[TV System]

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your country.

•[PAL] - For a PAL-system TV.

•[Multi] - For TV that is compatible with both PAL and NTSC.

•[NTSC] - For an NTSC-system TV.

[TV Display]

Select a display format:

•[4:3 Pan Scan] - For a 4:3 screen TV: full-height display with the trimmed sides.

•[4:3 Letter Box] - For a 4:3 screen TV: wide- screen display with black bars on the top and bottom of the screen.

•[16:9] - For a wide-screen TV: display ratio

16:9.

[Progressive]

If a progressive scan TV is connected to this product, turn on the progressive scan mode.

•[On] - Turn on progressive scan.

•[Off] - Turn off progressive scan mode.

EN 15