DVD Menu Options (continued)
Speaker Setup |
| Night Mode |
|
|
|
English
This menu contains setup options for your audio output which makes the speaker setup system reproduce high quality surround sound. For details, see page 22.
CD Upsampling
You can convert your music CD to a higher sampling rate using complicated digital signal for better sound quality. If CD upsampling is activated, the DVD player will automatically switch to stereo mode.
AIn ‘Audio Setup Page’, use S T keys to
highlight { CD Upsampling }, then press
X.
{Off }
Select this to disable the CD Upsampling function.
{88.2 kHz (x2) }
Select this to convert the CD sampling rate twice higher than the original.
{176.4 kHz (x4) }
Select this to convert the CD sampling rate four times higher than the original.
BUse S T keys to select a setting and press OK to confirm.
Tip:
– CD Upsampling feature is only applicable in stereo output setting.
This mode optimises playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.
AIn ‘Audio Setup Page’, use S T keys to highlight { Night Mode }, then press X.
{On }
Select this to set low volume output. This feature is only available for movie discs with Dolby Digital mode.
{Off }
Turns off night mode feature. Select this to enjoy the surround sound with its full dynamic range.
BUse S T to select a setting and press OK to confirm.
Lip Sync
This allows you to adjust the audio delay (ms) with respect to the video output for the lip synchronization.
AIn ‘Audio Setup Page’, use S T keys to highlight { Lip Sync }, then press X.
Use W X to adjust the following options; { 0ms } { 200ms }
BPress OK to confirm.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
38
