Getting Started
Step 1 : Inserting Batteries
AOpen the battery compartment.
BInsert two batteries type R06 or AA, following the indications (+
CClose the cover.
CAUTION!
–Remove batteries if they are exhausted or if the remote is not to be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so they should be disposed of properly.
Using the remote control to operate the system
AAim the remote control directly at the remote sensor (IR) on the front panel.
BDo not put any objects between the remote control and the DVD player while operating the DVD player.
Step 2 : Finding your viewing channel
APress STANDBY-ON 2 on the DVD player to turn it on.
BTurn on the TV and set it to the correct
Usually these channel are between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV’s manual for more details.
Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.
Or, the TV remote control may have a button or switch that chooses different video modes.
Or, set the TV to channel 3 or 4 if you are using an RF modulator.
CIf you are using external equipment, (e.g. audio system or receiver), turn it on and select the appropriate input source for the DVD player output. Refer to the equipment user’s manual for detail.
English
19
