Others
Operating a TV with the Remote Control
You can operate the basic functions of selected TVs using the supplied remote control
Operating a TV with the remote control
Preparation
Follow the instruction of “To program the remote control” to set the brand code.
Point the remote control at your TV, and use buttons as follows.
POWER | To turn the TV on or off. |
INPUT SELECT | To select external source |
| such as a VCR. |
NUMBER buttons | To select TV channel. When |
| selecting channels 1 to 9, |
| first enter 0 and then the |
| desired number. |
100 | To substitute for 100 |
| channel key. |
DISPLAY | To turn on or off TV’s screen |
| display. |
VOL + / - | To adjust the volume. |
CH +/ - | To select a channel. |
ENTER | To use for the TV’s ENTER |
| key. |
POWER
INPUT SELECT
Numbers/100
DISPLAY
CH, VOL
ENTER
To program the remote control
1.Press TV to select TV mode.
2.While holding down PROGRAM enter the two digits of your TV’s brand code (listed on page 61) using Number buttons.
e.g. To program brand code 01.
0 1
3.Release PROGRAM.
The DVD remote control memorizes the selected TV brand code.
Notes
•The remote control is programmed at the factory to operate TOSHIBA TVs.
•A single brand may use different codes depending on the particular model. Enter the correct number referring to the brand code table.
•For some brands, several brand codes are provided. Try each of them until the remote control operates your TV.
•Some TVs may not respond to all of the functions in the table above, or may not be operated at all with this remote control.
•If you replace the remote control’s batteries, remember to reprogram the brand codes for TV.
•To resume DVD functions, press DVD button once.
60
