Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 41 .
Connecting to a TV
• Make the following setting.
ANALOG/HDMI SETTING
In standby mode, select ANALOG mode through the ANALOG/HDMI switch on the front panel.
Notes
Select: | Page | |||
“Digital Out” | “PCM” or “Raw” | 50 | 55 | |
“Video Output” | CVBS | 50 | 54 | |
* YUV | ||||
|
|
| ||
* Only for analog video out jack (yellow) connection with progressive scan off.
•Refer to the owner’s manual of the connected TV as well.
•When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
•If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable adapter (not supplied) and then connect to your TV.
•Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.
•Analog audio out will not have sound if DTS playback is selected.
•Do not set the ANALOG/HDMI selection other than standby mode.
18
