ENGLISH 7
◗If the adapter or charging base is damaged, always have it replaced by one of the original type to avoid a hazard.
◗FC6092 only: if the car cord or car plug is damaged, stop using the car cord and have it replaced by one of the original type.
◗Never suck up water or any other liquid. Never suck up ashes until they are cold.
◗Never immerse the vacuum cleaner, the adapter or the charging base in water.
◗Remove the adapter from the wall socket before cleaning the charging base.
◗Only charge the vacuum cleaner with the adapter and charging base supplied. During charging, the adapter will feel warm to the touch.This is normal.
◗Always switch the vacuum cleaner off after use.
◗Keep the appliance out of the reach of children.
◗The voltage on the contact points in the charging base is low (max. 30 volts) and therefore not dangerous.
◗Never block the exhaust air openings during vacuuming.
◗Switch the appliance off when recharging it.
◗To avoid the risk of electric shock, be careful when drilling holes in the wall to attach the wall mounting bracket, especially close to a wall socket.
◗Always use the appliance with the filter unit.
◗Always use the appliance with the nozzle insert in place.
Preparing for use
Attaching the charging base to the wall
1Screw the wall mounting bracket to the wall with the screws supplied with the appliance (fig. 2).
2Attach the charging base to the wall mounting bracket (fig. 3).
3Attach the nozzle & stick holder to the wall mounting bracket (FC6094 only).
4Screw the nozzle & stick holder to the wall with the screws supplied with the appliance.
