8ENGLISH
5You can also place the charging base on a level and horizontal surface (fig. 4).
6Slide the brush tool onto the crevice tool and place them in the charging base (fig. 5).
7FC6094 only: insert the telescopic stick and the floor nozzle into the nozzle & stick holder ('click') (fig. 6).
Charging the appliance
Charge the appliance for at least 18 hours before you use it for the first time.
When the charging light starts blinking during operation, the battery pack is running low and needs to be recharged.
1Insert the small plug into the charging base and insert the adapter into the wall socket (fig. 7).
◗The charging light will go on to indicate that the appliance is
charging (fig. 8).
BThe charging light will stay on as long as the appliance is placed on the charging base and the adapter is in the wall socket.
BThe charging light does not give any information about the charge level of the
Using the appliance
1Push the on/off slide forwards to switch the appliance on (fig. 9).
2Push the on/off slide backwards to switch the appliance off (fig. 10).
3Leave the adapter in the wall socket and always put the vacuum cleaner back onto the charging base after use, even if the battery pack is still almost fully charged.
