Functional Overview
English
Basic function
IMPORTANT!
Before you operate the system, complete the preparation procedures.
Switching the system on
●Press STANDBY ON 2 or SOURCE key on the front panel.
➜The system will switch to the last selected source.
●Press DISC,TUNER, USB or AUX on the remote control.
➜The system will switch to the selected source.
Switching the system to Standby mode
●Press STANDBY ON 2 on the system (or POWER 2on the remote control ) in the
active mode.
➜ The backlight of display is dim in standby.
Power-saving automatic standby
●As a
Controls on the system
(illustrations on page 3)
1STANDBY ON
–to switch the system on or Standby mode.
2DISPLAY SCREEN
–to view the current status of the system.
3SOURCE
–to select the relevant active mode: DISC, USB,TAPE, AUX,FM, MW.
4AUDIO
–to select the audio channel.
SUBTITLE
–to select the preferred language for subtitle.
SOUND
–to select various sound effect:
538 (PLAY/PAUSE) for DISC/USB
-to start or interrupt playback.
-to resume playback from last stop point.
61 / ¡
–for DISC/USB ..... to search backward/forward.
–for TUNER ..........to tune to a lower or higher
radio frequency.
7MIC IN.
–to connect microphone jack.
8OPEN.CLOSE
-to open or close the disc tray.
9 PROGRAM
– for DISC/USB............. to program favorite tracks.
– for TUNER........ to program favorite stations.
0 I2 / 3I
– for DISC..........to skip to the previous/next chapter/track.
– for TUNER...............to select a preset radio station.
! STOP 7
– for DISC/USB................. to stop playback or to clear a programme.
– for TUNER.............to delete a preset radio
station.
@SENSOR
–point the remote control towards this sensor.
# MASTER VOLUME
–to adjust master volume level.
$MAX
–to activate/deactivate max sound.
% ;
–to connect headphones.
^USB DIRECT
–to connect USB device.
& TAPE DECK * 3 OPEN
–to open the tape deck door.
( CASSETTE KEY
–to control cassette play
) DISC TRAY
14