Philips FWD185 Setting the screen saver, Night mode - turning on/off Off, Changing the password

DVD Menu Operations

Setting the screen saver

If set to On, the screen saver will be activated when you leave the system in stop or pause mode for 5 minutes.The default setting is On.

Night mode - turning on/off

Off

Select this when you want to enjoy the surround sound with its full dynamic range.

On

Select this to level out the volume. High volume output will be softened and low volume output will be brought upward to an audible level.This feature is only available for movies with Dolby Digital mode.

Changing the password

You can change the six-digit code used as Password.

1In disc stop mode, press SETUP key on the remote control.

2Press 1 / 2/ 5 / 4 on the remote control to navigate in the menu.

➜Move to ”Preference Page” and press 4.

➜Move to “Password” and press 2.

➜Press OK.

The TV screen will display below picture

3Use the numeric keys (0-9) to enter your six- digit code.

➜The password supplied by default is 136900.

●Go to “Password” and enter your new code. Then, enter the same code again to confirm.

4Press SETUP again to remove the menu.

English

27