Philips FWD185 Connecting FM/MW antennas, Connecting the power, cord, On the DVD Mini Hi-FiSystem

Connections

English

Step 4: Connecting FM/MW antennas

	A
B	FM
	antenna
fix the claw
into the slot
12 mm	MW
	antenna
C
	FM
ANTENNA
MW

110-240 V~50 -60 HZ

●Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.

●Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its end to the wall.

For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.

8

Notes:

–Adjust the position of the antennas for optimal reception.

–Position the antennas as far as possible from your TV set,VCR or other radiation sources to prevent unwanted interference.

●Connect the T-TYPE antenna (not for all countries) to the FM jack at the back panel of the unit, and then fix it to the wall as shown.

T - TYPE antenn a

FM

ANTENNA

MW

Note:

–For better reception, please make sure that the two pronges of the T-TYPE antenna are in alignment with each other.

Step 5: Connecting the power

cord

8

~ AC MAINS

After everything is connected properly, plug in the AC power cord to the power outlet.

Never make or change any connection with the power switched on.

On the DVD Mini Hi-Fi System

“AUTO INSTALL PRESS PLAY” may appear on the display panel. Press 2; on the front panel to search and store all available radio stations or press 9 to exit.

12