Philips FWD185 Connecting TV set, You only need to make one video, S-Videoor Component Video

English

Connections

Step 3: Connecting TV set

INOUT

FM

ANTENNA

MW

8

IN	OUT
FM
MW
110-240 V~50 -60 HZ	8

IMPORTANT!

–You only need to make one video

connection from the following options, according to the capabilities of your TV system.

–S-Video or Component Video

connection provides higher picture quality. These options must be available on your TV set.

–Connect the system directly to the TV set.

Using Video In jack (CVBS)

●Use the composite video cable (yellow) to connect the system’s VIDEO jack to the video input jack (or labeled as A/V In,Video In, Composite or Baseband) on the TV set.

Using LINE OUT jack (L/R)

●To listen to this system channels through TV , use the audio cables (white/red) to connect LINE OUT (L/R) jacks to the corresponding AUDIO IN jacks on the TV set.

Using component Video In jack (Pr Pb Y)

●Use the component video cables (red/blue/ green) to connect the system’s PR PB Y jacks to the corresponding Component video input jacks (or labeled as Pr, Pb,Y or YUV) on the TV set.

●To listen to this system channels through TV , use the audio cables (white/red) to connect LINE OUT (L/R) jacks to the corresponding AUDIO IN jacks on the TV set.

10