Preparations
English
IMPORTANT!
–Make sure to complete the preparation procedures before operating the system.
Step 1: Inserting batteries into the remote control
3
1
2
1Open the battery compartment.
2Place two batteries (Type LR03 or AAA) in the compartment with the correct polarity as
indicated by “+” and
3Close the cover.
Using the remote control to operate the system
1Point the remote control directly to the remote sensor (IR) on the
front panel.
2Select the source you wish to
control by pressing one of the source select buttons on the remote control (for example DISC,TUNER).
3Then select the desired function (for example 2;, O or P).
CAUTION!
–Remove batteries if they are exhausted or will not be used for a long time.
–Do not use old and new or different types of batteries in combination.
–Batteries contain chemical substances, so they should be disposed of properly.
Step 2: Setting the TV set
IMPORTANT!
– Make sure you have completed all the necessary connections.
1Press SOURCE key on the front panel (or press DISC on the remote control).
2Turn on the TV set and set to the correct Video- In channel.You should see the blue Philips DVD background screen on the TV set.
➜ You may go to channel 1 on your TV set, then press the channel down button repeatedly until you see the Video In channel.
➜ Or, you can use the TV remote control to select different video modes.
➜ Or, set TV to channel 3 or 4 if you are using an RF modulator.
Selecting the color system that matches your TV set
This DVD Mini
16