Connections

English

L

R

SPEAKER 6

L

R

Using S-Video In jack

Use the S-Video cable (not supplied) to connect the system’s S-VIDEO OUT jack to the S- Video input jack (or labeled as Y/C or S-VHS) on the TV set.

To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set.

Deactivate Progressive Scan through SYSTEM MENU. See page 31, Using the Setup Menu- Using Progressive Scan to improve image quality.

IMPORTANT!

If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

Use the composite cable (yellow) to connect the system’s VIDEO jack to the video input jack on the RF modulator.

Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

Deactivate Progressive Scan through SYSTEM MENU. See page 31, Using the Setup Menu- Using Progressive Scan to improve image quality.

12

Page 12
Image 12
Philips FWD39/ 21 manual Using S-Video In jack, Using an accessory RF modulator