General Information/Maintenance
Environmental information
Any unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Care and safety information
Avoid high temperatures, moisture, water and dust
●Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep disc trays closed to avoid dust buildup on the lens.
●No objects filled with liquids, such as vases, shall be placed on the apparatus.
●No naked flame sources, such as lighted candles, should be placed on the apparatus.
Avoid condensation problem
●The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates.
Do not block the vents
●Do not operate the system in an enclosed cabinet and allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.
10 cm (4 inches)
| 10 cm |
|
|
|
| 10 cm |
|
(4 inches) |
|
| (4 inches) | ||||
|
|
| DVD Mini |
|
| ||
●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers
Cleaning the cabinet
● Use soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning discs
●To clean a CD, wipe it in a straight line from the center towards the edge using soft and
●Write only on the printed side of a CDR(W) and only with a soft
●Handle the disc by its edge. Do not touch the surface.
Cleaning the disc lens
●After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Finding a suitable location
●Place the player on a flat, hard, stable surface.
Cleaning the head and the tape paths
●To ensure good recording and playback quality, clean the head A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.
●Use a cotton swab slightly moistened with cleaning fluid or alcohol.
●You also can clean the head by playing a cleaning tape once.
C B A B C |
Demagnetising the head
●Use a demagnetising tape available at your dealer.
English
9
