English 21
Clean the shaver thoroughly before you continue shaving. See chapter ‘Cleaning and maintenance’.
-Cause 2: long hairs are obstructing the shaving heads.
Press the release button to open the shaving unit. Turn the wheel anticlockwise (1) and remove the retaining frame (2).
Clean the cutters and guards.
Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.
Remove the hairs with the brush supplied.
Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise.
To prevent long hairs from obstructing the shaving heads, remove the shaving heads once a month and clean them with the brush supplied.
-Cause 3: the shaving heads are damaged or worn. Replace the shaving heads. See chapter ‘Replacement’.
3The shaver does not work when the on/off button is pressed.
-Cause 1: the battery is empty.
Recharge the battery. See chapter ‘Charging’.
-Cause 2:
Clean the shaving heads thoroughly. See chapter ‘Cleaning and maintenance’.
-Cause 3: the shaving heads are damaged. Replace the shaving heads. See chapter ‘Replacement’.
