12English
The normal way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the shaver.
Be careful with hot water.Always check if the water is not too hot, to prevent your hands from getting burnt.
Every day: shaving unit and hair chamber
1Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug
out of the shaver.
2 Press the release button to open the shaving unit.
3 Clean the shaving unit and the hair chamber by
rinsing them under a hot tap for some time.
Make sure the inside of the shaving unit and the hair chamber have been cleaned properly.
4 Rinse the outside of the appliance.
5 Close the shaving unit and shake off excess water.
Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.
6Open the shaving unit again and leave it open
to let the appliance dry completely.
You can also clean the hair chamber without water by using the brush supplied.
