Philips HTS3455 user manual Night Mode, DVD Setup Menu Options continued, English

DVD Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

HDMI Audio	This setting is only required if you are using the DVD system’s
	HDMI OUT socket to connect your TV or other display device
	(see ‘Option4: Connecting to a HDMI-compatible).
	Note: It may take a while for the DVD system and the input
	device to communicate and initialise.
	{ Off }	–	Select this if the playback audio format is not
			supported by HDMI connection (e.g.
			projector, SACD). It will turn off the HDMI
			audio output.
	{ PCM }	–	Select this to downmix the audio signals to
			linear-PCM (2-channel).
	{ All }	–	Select this to enjoy the multi-channel audio
			output through the HDMI connection.

Note: It is not possible to listen to SACDs or copy-controlled DVD-

Audio CPPM (Content Protection for Playable Media) sources using the

HDMI connection.

Speakers Volume Access the speaker’s level setup menu. Use W X keys to adjust the volume level for each connected speaker between -6dB to +6dB.

Speakers Delay Access the speaker’s distance setup menu. Use W X keys to set the delay times for the centre and rear speakers based on the listening position and distance.

Note: 1 ms increase/decrease of delay time is equivalent to 30 cm change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

Night Mode	This mode optimises playback of sound at low volume. High
	volume outputs will be softened and low volume outputs will be
	enhanced to an audible level. This feature is only applicable for
	DVD video discs with Dolby Digital mode.
	{ On }	–	Turns on night mode.
	{ Off }	–	Turns off night mode feature. Selects this to
			enjoy the surround sound with its full
			dynamic range.

English

37