Philips HTS3455 Setting the speakers’ channels, Getting Started continued, Before you start

Getting Started (continued)

Step 6: Setting the speakers’ channels

You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.

Before you start...

Stop the disc playback by pressing STOP button twice or remove the disc from the disc tray. Otherwise, the settings are not accessible.

A In ‘DISC’ mode, press SETUP on the remote control.

B Press X repeatedly to select { Audio Setup Page }.

C Press T to highlight { Speakers Volume }, then press X.

Audio Setup Page

HDMI Audio

Speakers Volume

Speakers Delay

Night Mode

CD UpsamplingSpeakers Level Setup
Lip Sync	Front Left	0dB
	Front Right	0dB
	Center	0dB
	Subwoofer	0dB
	Rear Left	0dB
	Rear Right	0dB

E Use ST keys to highlight { Speakers Delay }, then press X.

Audio Setup Page

HDMI Audio

Speakers Volume

Speakers Delay

Night Mode

CD UpsamplingSpeakers Level Setup
Lip Sync	Front Left	0dB
	Front Right	0dB
	Center	0dB
	Subwoofer	0dB
	Rear Left	0dB
	Rear Right	0dB

F Use W X keys to set the delay times (0 ms ~ 15 ms) for centre and rear speakers that best suit your surround sound needs.

G Press OK to confi rm.

Helpful Hints:

–A 1ms increase/decrease of delay time is equivalent to 30 cm change in distance.

–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

–The test tone will be automatically generated to help you judge the sound level of each speaker.

English

D Use W X keys to set the volume level for

each speaker (-6dB ~ +6dB) and press OK to confi rm.

TIPS: Press W to go back to the previous menu item. Press SETUP to exit the menu.

25