• [System Audio Control] :Enables or disables System audio control.
If enabled, follow the instructions on the TV to map the connected devices correctly to the audio connectors of the home theater. The home theater switches automatically to the audio source of the connected device.
• [Audio Input Mapping] : Updates audio input mapping if there are new devices connected.
6 Press OK to confirm your choice.
Note
•• The connected devices must be connected through HDMI and switched on.
6 Change settings
This section helps you to change the settings of your home theater.
Caution
•• Most of the settings are already configured with the best value for the home theater. Unless you have a specific reason to change a setting, it is best to leave it at the default value.
Access the setup menu
1 Press 
SETUP.
»» The following menu appears.
SymbolDescription
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2 Select a setup menu, then press OK.
See the following sections for information about how to change the settings of your home theater.
3 Press 
BACK to return to the previous menu, or press 
SETUP to exit.
Note
•• You cannot change a setting that is grayed out.
12EN
