Philips HTS5110 user manual Update software, Check software version, Usb

7 Update software

To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site.

Check software version

1 Press SETUP.

2 Select [Preference Setup] > [Version Info.],

then press OK.

»» The software version is displayed.

Update software from a USB storage device

1 Check for the latest software version on www.philips.com/support.

• Search for your model and click on ‘software&drivers’.

2 Download the software onto a USB storage device.

3 Connect the USB storage device to the home theater.

4 Follow the instructions on the TV to confirm the update.

»» When the update is complete, the home theater automatically switches to standby.

5 Disconnect the power cord for a few seconds and then reconnect it.

Caution

•• Do not turn off the power or remove the USB storage device when the software update is in progress because you might damage the home theater.

8Product specifications

Note

•• Specification and design are subject to change without notice.

Playback medium

USB storage device

File Format

•• Audio: .mp3, .wma

•• Picture: .jpg Amplifier

•• Total output power: 300 W RMS

•• Frequency response: 20 Hz-20 kHz / ±3dB

•• Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)

•• Input sensitivity:

•AUX: 2 V

•MP3 LINK: 1 V

Video

•• Signal system: PAL / NTSC

•• HDMI output 480p, 576p, 720p, 1080i, 1080p

Audio

•• S/PDIF Digital audio input:

•Coaxial: IEC 60958-3

•• Sampling frequency:

•MP3: 32 kHz, 44.1 kHz, 48 kHz

•WMA: 44.1 kHz, 48 kHz

•• Constant bit rate:

•MP3: 112 kbps - 320 kbps

•WMA: 48 kbps - 192 kbps

Radio

•• Tuning range: FM 87.5-108 MHz (50 kHz)

•• Signal-to-noise ratio: FM 50 dB

•• Frequency response: FM 180 Hz-10 kHz / ±6dB

USB

•• Compatibility: Hi-Speed USB (2.0)

•• Class support: UMS (USB Mass Storage Class)

•• File system: FAT12, FAT16, FAT32

•• Maximum memory support: < 160GB

14EN